How to Fix WiFi and Bluetooth Issues on HP ProBook 440 G5 After Upgrading to an SSD
Upgrading your HP ProBook 440 G5 to an SSD can significantly improve performance, making your laptop faster and more responsive. However, some users encounter issues where WiFi and Bluetooth stop working after the upgrade. This can be frustrating, especially when you rely on wireless connectivity for work or entertainment. In this guide, we will explore the possible causes of this problem and provide step-by-step solutions to restore WiFi and Bluetooth functionality.
After upgrading to an SSD, several factors could lead to connectivity issues:
Loose or Disconnected Wireless Module – During the SSD installation, the internal wireless module may have been accidentally disconnected or loosened.
Driver Incompatibility – The system might be missing the correct drivers for the WiFi and Bluetooth hardware.
BIOS Settings Reset – Some BIOS settings might have reverted to default after the hardware change, disabling the wireless card.
Windows Power Management Settings – Windows may disable certain devices to save power, which can sometimes cause issues.
Hardware Damage – In rare cases, accidental damage to the WiFi card or antenna during the SSD upgrade process can cause connectivity problems.
Since the SSD upgrade required opening your laptop, it’s possible that the WiFi module was disturbed. To check:
Turn off your laptop and remove the back panel.
Locate the wireless card (usually a small chip with attached antennas).
Ensure the card is securely connected and that the antenna cables are properly attached.
Reassemble the laptop and power it on to see if the issue is resolved.
Driver issues are a common cause of connectivity problems. Follow these steps to reinstall the correct drivers:
Go to the HP Support website and enter your laptop’s model number.
Download the latest WiFi and Bluetooth drivers for your operating system.
Open Device Manager by right-clicking the Start Menu and selecting Device Manager.
Locate Network Adapters and Bluetooth, right-click, and choose Uninstall device.
Restart your laptop, then install the drivers you downloaded.
If your wireless card is disabled in the BIOS, your system won’t detect it. To check and enable it:
Restart your laptop and press F10 repeatedly to enter BIOS setup.
Navigate to Advanced or Security settings (varies by BIOS version).
Look for Wireless or Networking options and ensure WiFi and Bluetooth are enabled.
Save changes and exit.
Windows sometimes disables wireless adapters to save power. To disable this feature:
Open Device Manager and find your WiFi adapter under Network Adapters.
Right-click it and select Properties.
Go to the Power Management tab and uncheck Allow the computer to turn off this device to save power.
Repeat this process for the Bluetooth adapter if needed.
Windows has built-in troubleshooters that can detect and fix common connectivity problems.
Open Settings and go to Update & Security.
Click Troubleshoot, then select Internet Connections and Run the troubleshooter.
Repeat for Bluetooth if needed.
If none of the above solutions work, resetting the network settings may help.
Open Settings and navigate to Network & Internet.
Click Status, then scroll down and select Network reset.
Restart your laptop after the reset completes.
If your HP ProBook 440 G5 experiences WiFi and Bluetooth issues after an SSD upgrade, the problem is likely related to a loose connection, missing drivers, BIOS settings, or power management configurations. By following the steps outlined above, you should be able to restore connectivity. If the issue persists, consider seeking professional assistance to inspect potential hardware damage. A properly functioning SSD and wireless system will ensure you get the best performance from your laptop.
At Techera, we are your trusted source for high-quality computers, accessories, and tech solutions. With years of experience in the industry
Powered by WordPress